IEC / ISO 傳導耐受測試系統

阻抗穩定網路 ISN S501

◎阻抗穩定網路
◎同軸電纜的測試,BNC介面
◎完全符合CISPR22 Ed 5.2標準要求
◎符合CISPR22 Ed5.2 標準中圖D.9的結構要求
◎可以用做IEC61000-4-6標準傳導抗擾度的CDN

非對稱通信線耦合/去耦合網路 CDN AF Series

Used for all unscreened, unbalanced lines, carrying low current.

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

電磁耦合夾具 /電磁耦合鉗 KEMZ 801

◎KEMZ 801 EM電磁鉗,符合IEC/EN 61000-4-6
◎符合IEC/EN 61000-4-6標準
◎高效耦合
◎適用於所有線纜上
◎堅固設計

遮蔽線耦合/去耦合網路 CDN S Series

Used for screened, coaxial, USB and screened balanced telecommunication lines.
IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

射頻傳導耐受測試系統 NSG 4070

◎射頻傳導抗擾度
◎集成9 kHz~1 GHz信號發生器
◎9 kHz~1 GHz 功率計 (4個通道,1個為內部使用)
◎支持內部、外部放大器
◎5,7” TFT彩色顯示器及獨立操作的軟硬鍵盤
◎多個EUT監測選項
◎集成式功率放大器模組

通信線耦合/去耦合網路 CDN T Series

◎IEC/EN 61000-4-6
◎CISPR 24
◎EN 61000-6-1
◎EN 61000-6-2
◎IEC 60533
◎IEC 60601-1-2
◎IEC 61326

電源線耦合/去耦合網路 CDN M Series

IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. Teseq offers an extensive range of CDNs which fully comply with the requirements of the standard and provide a simple and reliable method of injecting RF energy into the equipment under test (EUT).

BCI 電流環 MD 4070

◎監測設備 MD 4070 10 kHz~400 (600) MHz
◎符合 IEC/EN 61000-4-6 標準要求
◎適合ISO 11452-4, RTCA/DO-160 第20節BCI測試要求
◎寬動態範圍的有源/無源工作狀態
◎適用於 NSG 4070
◎堅固設計

射頻衰減夾具 KEMA 801

◎KEMA 801 RF 衰減鉗
◎高去耦
◎適用於 KEMZ 801
◎使用簡便