SCCXL series 10kHz-100MHz 固態放大器

型號 : SCCXL series 10kHz-100MHz Solid State Amplifiers

Instruments for Industry, SCCXL-Series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 1200 watts in the 10 kHz – 100 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 100 MHz.

Our RF power amplifiers feature individually shielded aluminum assemblies for the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SCCXL-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(kHz – MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SCCXL10 10 kHz – 100 MHz 10 10 40 0.1 33 19 x 24 x 5.25
SCCXL25 10 kHz – 100 MHz 25 25 44 0.2 35 19 x 24 x 5.25
SCCXL50 10 kHz – 100 MHz 50 50 47 0.4 36 19 x 24 x 5.25
SCCXL100 10 kHz – 100 MHz 100 80 50 0.5 38 19 x 24 x 5.25
SCCXL150 10 kHz – 100 MHz 150 100 52 0.8 40 19 x 24 x 5.25
SCCXL200 10 kHz – 100 MHz 200 160 53 1.5 80 19 x 27.0 x 14.0
SCCXL250 10 kHz – 100 MHz 250 200 54 2 90 19 x 27.0 x 14.0
SCCXL350 10 kHz – 100 MHz 350 280 56 2.5 95 19 x 27.0 x 14.0
SCCXL500 10 kHz – 100 MHz 500 300 57 3 100 19 x 27.0 x 14.0
SCCXL800 10 kHz – 100 MHz 800 500 60 5 400 Rack Integrated
SCCXL1200 10 kHz – 100 MHz 1200 800 62 10 650 Rack Integrated


IFI SCCXL-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available

    • Special Prime Powers other then listed are subject to availability


Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote