SMXL series 10kHz-400MHz 固態放大器

型號 : SMXL series 10kHz-400MHz Solid State Amplifiers

Instruments for Industry, SMXL-series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 1000 watts in the 10 kHz – 400 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 400 MHz.

Our RF power amplifiers feature individually shielded aluminum assemblies for the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The “SMXL-SERIES” products are structurally engineered, from the ground up, to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(kHz - MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SMXL10 10 - 400 10 10 40 0.1 35 19 x 24 x 5.25
SMXL25 10 - 400 25 25 44 0.2 40 19 x 24 x 5.25
SMXL50 10 - 400 50 50 47 0.4 75 19 x 24 x 7.0
SMXL100 10 - 400 100 80 50 0.5 80 19 x 24 x 7.0
SMXL150 10 - 400 150 120 52 0.8 120 19 x 24 x 8.75
SMXL200 10 - 400 200 150 53 1.5 150 19 x 27.0 x 8.75
SMXL250 10 - 400 250 200 54 2 170 (2X) 19 x 27.0 x 10.5
SMXL300 10 - 400 300 250 55 2.5 180 (2X) 19 x 27.0 x 10.5
SMXL400 10 - 400 400 300 56 3 200 (2X) 19 x 27.0 x 10.5
SMXL500 10 - 400 500 400 57 4 250 (2X) 19 x 27.0 x 10.5
SMXL1000 10 - 400 1000 800 60 8 650 Rack Integrated


IFI SMXL-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available

    • Special Prime Powers other then listed are subject to availability



Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote