• TCCX 系列四極管放大器

TCCX 系列四極管放大器

型號 : TCCX Series Tetrode Tube Amplifiers

Instruments for Industry, TCCX-Series Tetrode Tube Amplifiers provide outstanding RF performance. Our “TCCX-Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These tetrode tube amplifiers have field proven reliability and unsurpassed performance as best of the breed. They were specifically designed for laboratory testing applications into the worst mismatch conditions. These products are available in a wide range of power levels from 500 watts to 12000 watts in the 10 kHz – 220 MHz frequency range.

IFI Tetrode Tube amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. The Amplifier system integrates a Solid State Power supply to provide reliable brute-power performance at frequencies up to 220 MHz.

Our RF power amplifiers feature modular heavy duty construction. This concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “TCCX-SERIES” tetrode tube amplifier products are structurally engineered to withstand operation into complete mismatch conditions without folding back. A product and design built to last!


Model Number Frequency Range
(kHz – MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
TCCX500 10 kHz – 220 MHz 500 400 57 4.0 22 Rack Integrated
TCCX1000 10 kHz – 220 MHz 1000 800 60 8.0 24 Rack Integrated
TCCX2000 10 kHz – 200 MHz 2000 1500 63 15.0 25 Rack Integrated
TCCX2200 10 kHz – 200 MHz 2200 1600 64 16.0 27 Rack Integrated
TCCX2500 10 kHz – 200 MHz 2500 1800 64 20.0 35 Rack Integrated
TCCX3500 10 kHz – 100 MHz 3500 2000 66 25.0 40 Rack Integrated

Pulse
Model Number

 

Rated
Pulse
Power

Rated
CW
Power

         
TCCX500P 10 kHz – 220 MHz 1500 500 400 57 4.0 600 Rack Integrated
TCCX1000P 10 kHz – 220 MHz 3000 1000 800 60 8.0 750 Rack Integrated
TCCX2000P 10 kHz – 200 MHz 6000 2000 1500 63 15.0 1000 Rack Integrated
TCCX2200P 10 kHz – 200 MHz 6500 2200 1600 64 16.0 1200 Rack Integrated
TCCX2200ULP 10 kHz – 200 MHz 12000 2200 1600 64 16.0 1600 Rack Integrated
TCCX2500P 10 kHz – 100 MHz 7500 2500 1800 64 20.0 1250 Rack Integrated


IFI TCCX Series Tetrode Tube Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1, with full power
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack/ Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    120/208 ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available

    • Special Prime Powers other then listed are subject to availability



Tetrode Tube Amplifier Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Modular Design Construction
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 Interface, RS232 & Ethernet
  • Tetrode Tube Design
  • Solid State Power Supply