ZES ZIMMER LMG610 Single Channel Power Analyzer

型號 : LMG610 Single Channel Power Analyzer

LMG610 - The Most Precise in its Class

One-shot Results for Narrowband, Full Spectrum and Harmonics


Measurement Channels

  • Outstanding accuracy of 0.015% of measured value + 0.01% of range
  • Full dynamic range of 500 µA to 32 A / 3 mV to 1000 V per channel available in single instrument
  • Power measurements from standby to full load (max. 32 A) without mechanical changes
  • Analog bandwidth DC up to 10 MHz
  • Gapless sampling up to 18 bit and a minimal cycle time of 30 ms
  • Delay time between V and I input < 3ns, very precise measurements at small power factors (PF) and/or high frequencies


  • Simultaneous measurement of narrow- and broadband values through innovative DualPath architecture
  • Simultaneous capturing of fundamental frequency and broadband RMS values for instantaneous detection of losses, resp. high-frequency components
  • Harmonics and interharmonics up to 2000. order, as required by EN61000-4-7
  • With optional I/O card speed/torque inputs freely configurable for all signal types (analogue, frequency as RS422,TTL or HTL) via menu
  • Flexible scripting tool for custom applications
  • Simultaneous measurement of V, I, P values and harmonics, presentation in tabular or graphical form
  • Signal filters freely configurable by frequency, type and characteristics
  • Synchronization to different frequencies
  • Flicker measurement, interactions between grid and appliance according to EN61000-4-15


  • Large and clearly arranged touchscreen GUI for intuitive handling
  • All instrument features displayed, identical look-and-feel for local and remote operation for quick and easy familiarization

Memory and Interfaces

  • Internal storage of long-term measurements even with shortest cycle-time thanks to integrated mass storage device
  • Excellent connectivity via USB2.0, Gbit-LAN, and RS232


  • Convenient "plug-and-measure" through automated sensor detection
  • no external sensor power supply required
  • 12 months guaranteed calibration interval for minimal service cost and optimal availability
  • Calibration certificate included free-of-charge in first delivery
  • 24 months warranty

Technical specifications





LMG640 (Table top)

455 mm

224 mm

200 mm




Depending on installed options: max. 7.2 kg

Protection class

EN 61010 (IEC 61010, VDE 0411), protection class I / IP20 in accordance with EN 60529

Electromagnetic compatibility

EN 61326


0 ... 40 °C (operation) / -20 ... 50 °C (storage)

Climatic category

Normal environmental conditions according to EN 61010

Line input

100 ... 230 V, 47 ... 63 Hz, max. 200 W


Tech Specs LMG670 notes

Complete data collection

In the wake of stricter monitoring of consumption and efficiency of electrical appliances, new standards and procedures (eg SPECpower_ssj2008, IEC 62301) will continuously be created to enable an objective comparison of the different manufacturers. Whether it is workstations, servers or appliances, is irrelevant to the principle: The long-term evaluation of the power consumption has always to take all relevant operating conditions into account. The differences between minimum load - e.g., Idle mode, - and full load can thereby be of considerable magnitude, which requires a very sophisticated means of measurement (see also Application Note No. 102, "Measurement of standby power and energy efficiency."). The measurements must be carried out over several hours and may not show any gaps. By selecting a sufficiently large measurement range, range changes and the inevitably resulting data losses can be avoided. The fundamental precision LMG600 also ensures an accurate measurement at the lower limit of a range.

Exact measurements thanks to minimal runtime differences

The fast switching semiconductors used to improve the efficiency of  modern frequency converters cause extremely steep voltage edges. The resulting capacitive currents affect the bearings and the motor insulation - this can lead to premature failure.
Motor filter (e.g. du / dt filter) attenuate the voltage gradient, but generate themselves power dissipation due to the settling of the filters' frequencies (typically > 100 kHz). The high bandwidth and the small time difference between the current and voltage of the LMG600 enable highly accurate power loss measurements on the filters at these frequencies, and longitudinal measurements with small cos φ. This also applies to power measurements at high bandwidths up to 10 MHz. This requires that the current and voltage channels must be designed for minimum delay differences; in the LMG600 it is less than 3 ns; this corresponds to 50 Hz at an angle error <1 μrad. The instrument is therefore ideally suited for the power loss measurement at small phase angles for transformers, inductors, capacitors and ultrasonic sensors. No options or adjustments are necessary, as the devices will fully meet this measurement task already in the default setting when shipped. For measurements on circuits of highest performance, typically current and voltage transducers are employed. The phase angle of the converter can be corrected via the runtime menu and thus the measurement accuracy can be improved.


Aviation Compliance

Particularly in the aerospace industry, electromagnetic compatibility between installed systems poses an existential threat. For this reason, applicable legislation such as ABD0100.1.8 sets limits on harmonic currents up to the range of 150 kHz. These harmonics can be analyzed using the LMG670. First of all, this is possible directly thanks to the implementation of harmonics analysis, and secondly it allows for the desired level of detail through the transfer and analysis of the sampling values using external software.

Aerospace Conformity