T-2000 Series 1GHz-18GHz 2000W 行波管放大器

T-2000 Series High Power RF Microwave TWT Amplifiers provide outstanding RF performance. Our “T-2000 Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field proven reliability and unsurpassed performance as the best in the industry. These products are available in a wide range of frequency bands from 1 GHz – 18 GHz at 2000 watts.

Operation safety and ease of use are paramount in IFI TWTA product designs. The IFI T-2000 Series TWT (traveling wave tube) amplifier include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the T-2000 series TWTA's include a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use. Our TWT amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the TWT testing amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the T-2000 Series testing amplifiers can be easily customized with harmonic filters or other options. With this capability and its reliable elegant design, the T-2000 series TWTA is the perfect amplifier for your microwave EMI and EMC testing needs. IFI offers different size packages and configurations to best suit your application.

IFI T-2000 Series High Power TWT Amplifier Specifications

• Input/output Impedance: 50 ohms
• RF Input/ Sample Connectors: Type N Female, unless specified otherwise
• RF Output Connector: Type 716 Female up to 4.0 GHz is WRD350, 2.5 – 7.5 GHz is WRD250, 8 – 12 GHz is WR90, 12 – 18 GHz is WR62, 7.5 – 18 GHz is WRD750, 6.5 – 18 GHz is WRD650 Other waveguides available by request or specification (see Option 117)
• Input VSWR: 2.0:1
• Output VSWR: 2.5:1
• Operating Temp: 0º to 50º C
• Non-operating Temp: -40º to 70º C (50,000 feet max)
• Humidity: 95% without condensation
• Altitude: 10,000 feet
• Cooling System: Air cooled, self contained
• Modulation: All types, AM, FM, Pulse
• Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
• Spurious Outputs: <-60 dBc nominal

• Standard Prime Powers:
  100, 115, 120 VAC ±10% 50/60 Hz, single phase
  200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
  100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.

  • Special Prime Powers other then listed are subject to availability

TWT Amplifier Features:

• Instantaneous Broadband Frequency range
• Modular Design Construction
• Rugged Construction & High Reliability
• Backlit LCD Display
• Integrated Force Air Cooling
• Self-diagnostic circuitry
• IEEE-488 interface, RS232
• Solid State Power Supply