IEC/EN 61000-4-6 specifies the design and performance of a range of coupling/decoupling networks (CDNs). Each CDN is specific to the type of cable and the intended signal carried on the cable. The CDN M series is used to inject the RF disturbance on the main line (supply). Teseq offers an extensive range of CDN M2 series for two line AC and DC applications. The operating frequency starts from 150 kHz to 230 MHz. Teseq CDN M2 series comply fully with the requirements of the standard and provide a simple, reliable and safe method of injecting RF energy into the equipment under test (EUT).

IEC/EN 61000-4-6 規範了一系列耦合／去耦合網路（CDN）的設計與性能要求。每種 CDN 均針對特定的電纜類型及其所傳輸的訊號進行設計。CDN M 系列用於在主電源線（供電線）上注入射頻干擾。Teseq 提供完整的 CDN M2 系列產品，適用於雙線 AC（交流）與 DC（直流）應用，其操作頻率範圍為 150 kHz 至 230 MHz。Teseq 的 CDN M2 系列完全符合標準要求，能夠為受測設備（EUT）提供一種簡單、可靠且安全的射頻能量注入方式。

• Coupling networks designed for IEC/EN 61000-4-6
• CDN M series for mains applications
• Models with frequency range from 150 kHz to 230 MHz
• For 2 Lines application
• Models with 4 mm safety banana sockets or terminal block
• with maximum current of 32 A
• Special model that fit with home appliances

• 專為 IEC/EN 61000-4-6 標準設計的耦合網路
• CDN M 系列，適用於電源線應用
• 頻率範圍 150 kHz 至 230 MHz 型號
• 適用於 2 線路應用
• 提供 4 mm 安全香蕉插座或端子排型號
• 最大電流 32 A
• 特殊型號適用於家用電器

• IEC / EN Basic Standards : IEC 61000-4-6
• CISPR Standards : CISPR 24
• IEC / EN Generic Standards : EN 61000-6-1 EN 61000-6-2
• IEC / EN Product Standards : IEC 60533 IEC 60601-1-2 IEC 61326