The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line. The geometrical dimensions having a line impedance of Z = 50 Ω. At the end is required a 50 Ω termination. Typical for this strip line is the low power request for high field strength values. The strip line is specified in ISO 11452-5 ‘Road Vehicles electrical disturbances through radiated narrow-band electromagnetic energy: Measurement procedure for components part 5: Strip Line’. The SL 50 allows testing electrical/electronic sub modules (EUB) and their associated cables.
SL 50 帶狀線中產生的橫向電磁波模式 (TEM) 提供了在帶狀線內部進行電磁兼容性 (EMC) 測試的可能性。其幾何尺寸設計使其具有 Z = 50 Ω 的特性阻抗，末端需要 50 Ω 的終端負載。這種帶狀線的典型特點是在產生高場強值時所需的功率較低。SL 50 帶狀線的規範符合 ISO 11452-5「道路車輛 - 窄頻輻射電磁能量引起的電氣干擾 - 零部件的測量程序 - 第 5 部分：帶狀線」。SL 50 允許測試電氣/電子次模組 (EUB) 及其相關線纜。
-
EMC tests for vehicle components immunity to RF fields
-
Conform with ISO 11452-5
-
Efficient power conversion provides high fields with minimum power
-
車用元件對射頻電磁場抗擾度的 EMC 測試
-
符合 ISO 11452-5 標準
-
高效率的功率轉換設計，可在最小功率下產生高強度電磁場
-
IEC / EN Basic Standards : IEC 61000-4-20
-
CISPR Standards : CISPR 25
-
Automotive Standards : ISO 11452-5
